Guides · 04
Which iPhone cameras can record together, and at what quality?
Short answer
It depends on the device, its iOS version and the exact cameras you combine. iOS publishes which camera sets can run at the same time and allows only certain formats in a multi-camera session, all within a shared hardware budget. More cameras usually means a lower resolution or frame rate for each. Allcamera reads those limits on your device and shows each camera’s actual size before you record; buying Premium doesn’t change them.
What iOS decides
Apps that record several cameras at once use Apple’s multi-camera capture session. Four rules shape what is possible:
- Which cameras. iOS lists the sets of cameras a device can use together. An app may combine cameras only from one of those sets.
- Which formats. In a multi-camera session, each camera may only use formats marked as multi-camera capable. Apple describes these as the limited subset of formats that can run sustainably with several cameras.
- A shared budget. The session reports a hardware cost between 0 and 1 for the cameras, outputs and features in use. Above 1, the configuration cannot run.
- Heat and power. A separate system-pressure cost estimates whether a configuration can run sustainably. Under critical pressure, iOS temporarily stops the session.
So the question is never only “Does my iPhone shoot 4K at 60 fps?” but “Can these particular cameras do it together, right now?”
What it looked like on one iPhone
These results come from our own short test recordings on an iPhone 18 Pro Max running iOS 27.2 in November 2026. They show the pattern, not a promise for your device. A different model, iOS version, lens choice or temperature can change them.
| Setup | What we recorded |
|---|---|
| One camera | 4K at 60 fps |
| Two cameras | 4K at 30 fps, or 1080p at 60 fps |
| Three cameras | Camera A at 4K with B and C at 1080p, all at 30 fps; or all three at 1080p 60 fps |
| 4K at 60 fps with several cameras | Not offered: this phone reported no multi-camera 4K format above 30 fps |
| Photos with several cameras | 12 MP (4032 × 3024) per camera |
| 48 MP photos | One camera only, in good light |
These were short takes, not endurance tests. iOS can also deliver a smaller photo than requested in low light.
Check your own device for free
You don’t need to buy anything to see what your device offers:
- Install Allcamera and choose Video.
- Tap 1, 2 or 3. Only the counts your device can run appear.
- Choose lenses with each view’s lens badge. Combinations can differ, for example front and back versus two rear lenses.
- Tap the size and frame rate at the top. The video format panel lists every camera’s actual size and framing.
- Choose a resolution first; the frame-rate row then shows the rates available at that size. If 60 fps isn’t available at 4K with several cameras, choose 1080p to see its rates.
Premium unlocks recording, higher supported photo sizes and saved presets. It never raises what your hardware supports.
Why 48 MP photos drop out
The large photo sizes some iPhone cameras offer are not among the formats allowed when several cameras run together on the device we tested, so a multi-camera photo used 12 MP per camera there. Free Standard photos are about 12 MP or lower depending on the camera. With Premium, Allcamera offers larger sizes when the selected camera reports them, which in practice usually means one camera.
Reading the numbers in Allcamera
- The size shown at the top describes camera A, or the picture-in-picture movie. The format panel lists each camera separately.
- With separate files, cameras in one take can have different sizes, such as one 4K camera and two 1080p cameras.
- Allcamera never enlarges a smaller original to label it 4K.
- If a setup ever shows a one-minute limit badge, it applies to that setup with or without Premium, and every camera stops and saves together. Other setups have no app-imposed time limit.