Allcamera
Language: English
Download on the App Store

Guides · 01

How to record with the front and back cameras at the same time on iPhone

Updated

Short answer

Use an app that runs Apple’s multi-camera capture. In Allcamera, choose Video, tap 2, set one view to Front and the other to a rear lens, choose separate files or picture in picture, then press the shutter once. Both cameras start and stop together. Your device decides which cameras can run together, and Allcamera only offers the groups it reports.

Check your device first

Recording two cameras at once depends on Apple’s multi-camera capture. iOS reports which sets of cameras a device can run together, and an app can only combine cameras from one of those sets. That is why the same app can offer front and back on one iPhone and not on another.

  • Allcamera needs iOS or iPadOS 18 or later.
  • The 2 and 3 buttons appear only when your device reports a camera group it can run.
  • Taking photos is free. Recording video needs the one-time Premium purchase, but you can set up cameras, framing and quality in Video before you buy.

Set up front and back in Allcamera

  1. Open Allcamera and choose Video above the shutter.
  2. In the row just above Photo / Video, tap 2.
  3. Tap the lens badge on the large view (camera A) and choose a rear lens, such as 1× or 0.5×.
  4. Tap the lens badge on the smaller view (camera B) and choose Front. If the other view already uses that lens, the two swap.
  5. Choose how to save with the two icons beside 1 / 2 / 3: overlapping rectangles keep separate files; a rectangle with an inset makes one picture in picture.
  6. Press the red shutter once to start both cameras. Press it again to stop both.

A faster route: open Presets and tap Front & Back. Built-in presets appear only when your device can run those cameras together, and a preset never starts recording by itself.

Frame the shot

  • Pick the big view. Camera A is the large view and, in picture in picture, the canvas. The round button beside the shutter swaps the views when you want your face large instead.
  • Choose a shape for each camera. Tap the framing button beside camera A’s lens badge, or in the lower-left corner of B’s view, and pick Auto, Portrait or Landscape.
  • Place the inset. Drag the small view where it won’t cover the subject. Pinch it or drag its corner to resize. In picture in picture, the saved video follows this layout.

Light and focus for each camera

The front and back cameras often see very different light, such as a bright sky behind the view and a shaded face. Each view has its own controls:

  • Tap a view to focus and meter there.
  • Touch and hold to lock focus and exposure, useful when you walk through changing light.
  • Drag the sun up or down on a view to brighten or darken only that camera, even while recording.

Separate files or picture in picture?

Choose separate files if you plan to edit: you get one synchronized original per camera, each with its own framing. Choose picture in picture when you want one finished video to share as it is. If you recorded separately, you can still make a picture-in-picture movie later from compatible originals in the gallery. See Separate files or picture in picture for a full comparison.

Practical tips

  • Allow the microphone when asked, so the take records sound.
  • Plan for storage. Separate files mean one video per camera, so a two-camera take uses more space than a single video of the same length.
  • Watch the heat. Running several cameras is demanding. Apple notes that a capture session can be interrupted when the system reaches a critical pressure state, so long takes in hot conditions deserve a short test first.
  • Check quality before you start. Two cameras usually record at a lower resolution or frame rate than one camera alone. Tap the size and frame rate at the top of the screen to see each camera’s actual size.

Sources

  1. Apple Developer: AVCaptureMultiCamSession
  2. Apple Developer: supportedMultiCamDeviceSets
  3. Apple Developer: systemPressureCost